Int'l Journal
?

단축키

이전 문서

다음 문서

+ - Up Down Comment Print
저자 Jun-Hyuk Im,
Jun-Kyu Kang,
Jin Hur, Fellow, IEEE
논문지명 IEEE Transaction
on Industry Applications

Title: Utilization of Multiple Planar Search Coils for Diagnosing Imbalance Irreversible Demagnetization Faults in PMSMs along the z-Axis 

Authors: Jun-Hyuk Im, Member, IEEE, Jun-Kyu Kang, Student, IEEE, and Jin Hur, Fellow, IEEE

will be published in IEEE Transactions on Industry Applications


Abstract— Permanent magnet motors with magnets installed on the rotor are widely employed in various fields due to their excellent efficiency and output density. However, magnets are susceptible to irreversible demagnetization faults, where their magnetic properties degrade due to stresses such as external magnetic fields and high temperature condition. Irreversible demagnetization faults can deteriorate motor performance and even lead to catastrophic failures like control failures. Furthermore, due to the uneven distribution of stresses, such as heat and magnetic flux, on the motor magnets, irreversible demagnetization faults exhibit non-uniformity along the z-axis direction. Therefore, there is a need to study diagnostic techniques for irreversible demagnetization faults. Various diagnostic techniques have been proposed; however, most of them cannot provide diagnostics for individual magnet segments. In this paper, we introduce a fault diagnosis technique using planar search coils attached to the surface of the motor's stator. The planar search coils can be fabricated in various shapes, allowing for the arrangement of multiple coils along the z-axis of the motor to acquire signals based on the flux crossing each coil. This technique is validated through finite element analysis and experiments. As a result, it is confirmed that the proposed technique allows for fault diagnosis in both the non-excited and excited states using the acquired signals.

문서 첨부 제한 : 0Byte/ 2.00MB
파일 크기 제한 : 2.00MB (허용 확장자 : *.*)

번호 분류 제목 논문지명 저자
23 2016 "Detection of Inter-Turn and Dynamic Eccentricity Faults using Stator Current Frequency Pattern in IPM-type BLDC Motors"   IEEE Transaction on
Industrial Electronics 
Jun-Kyu Park, Jin Hur 
22 2007 "Design of fuel cell generation system using a PEMFC simulator"   Journal of Electric Power
Systems Research 
T.W. Lee, Jin Hur,
B.K. Lee, and C.Y. Won 
21 2014 "Design and Optimization of Neodymium Free SPOKE-Type Motor with Segmented Wing Shape PM"   IEEE Transactions
on Magnetics 
M. M. Rahman,
K. T. Kim,
Jin hur 
20 2016 "Demagnetization Detection for IPM type BLDCM according to Irreversible Demagnetization Patterns and Pole-Slot Coefficient"   Journal
of Power Electronics 
D-H Kang, H-K Kim,
J-K Park, S-H Hyun,
and Jin Hur 
19 2014 "Comparison of the Fault Characteristics of IPM-type and SPM-type BLDC Motors under Inter-Turn Fault Conditions Using Winding Function Theory"   IEEE Transactions on
Industrial Applications 
K. T. Kim, J. K. Park,
Jin Hur 
18 2015 "Comparison Analysis of Demagnetization and Torque ripple in accordance with Freewheeling Current in PM BLDC Motor"   IEEE Transactions
on Magnetics 
H. K Kim, J. H Park,
and Jin Hur. 
17 2004 "CHARACTERISTIC COMPARISONS BETWEEN IRON POWDER MATERIALS AND LAMINATION CORES IN BRUSHLESS MOTORS"   Computer Engineering
in Applied Electromagnetism 
Y.G. Kim, J.P. Hong,
G.H. Ha, Jin Hur
and H.G. Sung 
16 2006 "Characteristic Analysis of the Slotless Axial-Flux Type Brushless DC Motors Using Image Method"   IEEE Transactions
on Magnetics 
S.H. Lee, S.B. Park,
S.O. Kwon, J.Y. Lee,
J.J. Lee, J.P. Hong,
and Jin Hur 
15 2008 "Characteristic Analysis of Interior Permanent Magnet Synchronous Motor in Electro-Hydraulic Power Steering System"   IEEE Transactions
on Industrial Electronics 
Jin Hur 
14 2004 "Analysis of Single-Phase Line-Start Permanent Magnet Motor Considering Iron Loss and Parameter Variation with Load Angle"   IEEE Transactions on
Industrial Applications 
G.H. Kang, B.K. Lee,
H. Nam, Jin Hur
and J.P. Hong 
13 1997 "Analysis of PMLSM Using Three Dimensional Equivalent Magnetic Circuit Network Method"   IEEE Transactions
on Magnetics 
Jin Hur, S.B. Yoon,
D.Y. Hwang and D.S. Hyun 
12 2003 "Analysis of Irreversible Magnet Demagnetization in Line-Start Motors based on Finite Element Method"   IEEE Transactions
on Magnetic 
G.H. Kang, Jin Hur,
J.P. Hong, and D.H. Kang 
11 2007 "A Novel Ultrasonic Motor Using Orthogonal Bimorphs"   IEEE Transactions
on Magnetics 
J.M. Seo, Jin Hur
and H.G. Sung 
10 2016 "A Novel Proposal to Improve Reliability of Spoke-Type BLDC Motor using Ferrite Permanent Magnet"   IEEE Transaction on Industry
Applications 
Chae-Lim Jeong and Jin Hur 
9 2009 "A Novel Cogging Torque Reduction Method for Interior Type Permanent Magnet Motor"   IEEE Transactions on
Industrial Applications 
G.H. Kang, Y.D. Son ,
G.T. Kim, and Jin Hur 
8 1997 "A Method of Optimal Design of Single-Sided Linear Induction Motor for Transit"   IEEE Transactions
on Magnetics 
S.B. Yoon, Jin Hur
and D.S. Hyun 
7 1998 "A Method for Reduction of Cogging Torque in Brushless D. C. Motor Considering the Distribution of Magnetization by 3D EMC"   IEEE Transactions
on Magnetics 
Jin Hur, J.P. Hong
and D.S. Hyun 
6 2007 "A Fuzzy Logic based Vector Control Scheme for Permanent Magnet Synchronous Motors in Elevator Drive Applications"   IEEE Transactions
on Industrial Electronics 
J.S. Yu, S.H. Kim,
B.K. Lee, C.Y. Won
and Jin Hur 
5 2008 "A Cost Effective 3-Phase FRM Drive with 4 switches and Bootstrap Gate Control Circuitry"   IET Electronics Letters  H.S. Kang, Jin Hur,
and B.K. Lee 
4 2001 "3D Time-Stepping Analysis of Induction Motor by New Equivalent Magnetic Circuit Network Method"   IEEE Transactions
on Magnetics 
Jin Hur, Hamid A. Toliyat
and Jung-Pyo Hong 
Board Pagination ‹ Prev 1 2 3 4 5 6 Next ›
/ 6
Designed by hikaru100

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소

SketchBook5,스케치북5

SketchBook5,스케치북5

SketchBook5,스케치북5

SketchBook5,스케치북5