|
77 | 2013 |
“Design and Analysis of a Spoke Type Motor with Segmented Pushing Permanent-Magnet for concentrating air-gap flux density”
|
IEEE Magnetics | M.Mizanoor,
K.T. Kim, Jin Hur |
|
76 | 2014 |
"Design and Optimization of Neodymium Free SPOKE-Type Motor with Segmented Wing Shape PM"
|
IEEE Transactions
on Magnetics | M. M. Rahman,
K. T. Kim,
Jin hur |
|
75 | 2013 |
“Suppression of Shaft Voltage by Rotor and Magnet Shape Design of IPM-Type High Voltage Motor”
|
Journal
of Electrical Engineering
& Technology (JEET) | K.T. Kim, S.H. Cha,
J. Hur, B.W. Kim |
|
74 | 2014 |
"Optimization of Magnetic Flux-path Design for Reduction of Shaft Voltage in IPM-Type BLDC Motor"
|
Journal
of Electrical Engineering
& Technology (JEET) | K.T. Kim, Jin Hur |
|
73 | 2013 |
“Calculation of Distributed Magnetic Flux Density under Stator-Turn Fault Condition”
|
Journal
of Power Electronics
(JPE) | K.T. Kim, B.W. Kim,
Jin Hur |
|
72 | 2014 |
"Diagnosis Technique Using a Detection Coil in BLDC Motors with Inter-Turn Faults"
|
IEEE Transactions
on Magnetics | K. T. Kim, S. T. Lee,
Jin hur |
|
71 | 2014 |
"Comparison of the Fault Characteristics of IPM-type and SPM-type BLDC Motors under Inter-Turn Fault Conditions Using Winding Function Theory"
|
IEEE Transactions on
Industrial Applications | K. T. Kim, J. K. Park,
Jin Hur |
|
70 | 2023 |
Development of Matlab-Based IPMSM Model Considering Fault Modes of xEV Platform for SILS
|
Journal of Electrical
Engineering & Technology
(JEET) | Jun‑Hyeok Heo
Jun‑Kyu Kang
Jin Hur |
|
69 | 2016 |
"New Equivalent Circuit of the IPM-type BLDC Motor for Calculation of Shaft Voltage by Considering Electric and Magnetic Fields"
|
IEEE Transactions on
Industry Applications | Jun-kyu Park, Thusitha Wellawatta,
Zia Ullah, and Jin Hur |
|
68 | 2016 |
"New Equivalent Circuit of the IPM-type BLDC Motor for Calculation of Shaft Voltage by Considering Electric and Magnetic Fields"
|
IEEE Transactions on
Industry Applications | Jun-kyu Park, Thusitha Wellawatta,
Zia Ullah, and Jin Hur |
|
67 | 2017 |
Mitigation Method of the Shaft Voltage according to Parasitic Capacitance of the PMSM
|
IEEE Transactions
on Industry Applications | Jun-kyu Park, Thusitha Wellawatta,
Sung-Jin Choi, and Jin Hur |
|
66 | 2017 |
Mitigation Method of the Shaft Voltage according to Parasitic Capacitance of the PMSM
|
IEEE Transactions
on Industry Applications | Jun-kyu Park, Thusitha Wellawatta,
Sung-Jin Choi, and Jin Hur |
|
65 | 2016 |
"Detection of Inter-Turn and Dynamic Eccentricity Faults using Stator Current Frequency Pattern in IPM-type BLDC Motors"
|
IEEE Transaction on
Industrial Electronics | Jun-Kyu Park, Jin Hur |
|
64 | 2016 |
"Detection of Inter-Turn and Dynamic Eccentricity Faults using Stator Current Frequency Pattern in IPM-type BLDC Motors"
|
IEEE Transaction on
Industrial Electronics | Jun-Kyu Park, Jin Hur |
|
63 | 2021 |
Comparison of Fault Characteristics according to Winding Configurations for Dual Three-Phase Synchronous Reluctance Motor
|
IEEE Transaction
on Industry Applications | Jun-Kyu Park,
Cristian Babetto,
Grazia Berardi,
Jin Hur,
and Nicola Bianchi |
|
62 | 2024 |
Novel Structure of Shield Ring to Reduce Shaft Voltage and Improve Cooling Performance of Interior Permanent Magnet Synchronous Motor
|
Electronics | Jun-Kyu Kang,
Jun-Hyeok Heo,
Su-Hwan Kim
Jin Hur * |
|
61 | 2022 |
Fault Mechanism Analysis of IrreversibleDemagnetization Due to the Dynamic Eccentricityof IPMSM for EV Traction
|
IEEE Access | JUN-KYU KANG,
JIN HUR (Fellow, IEEE) |
|
60 | 2024 |
Application and Verification of Voltage Angle-Based Fault Diagnosis Method in Six-Phase IPMSM
|
IEEE Trans. on
Industry Applications | Jun-Kyu Kang ,
Dong-Wook Yoo,
Jin Hur, IEEE Fellow |
|
59 | 2021 |
Shaft Voltage Reduction Method Using CarrierWave Phase Shift in IPMSM
|
MDPI, Energies | Jun-Hyuk Im, Yeol-Kyeong Lee,
Jun-Kyu Park, Jin Hur |
|
58 | 2022 |
Shaft Voltage Elimination Method to Reduce Bearing Faults in Dual Three-Phase Motor
|
IEEE Access | Jun-Hyuk Im, Member IEEE,
Jun-Kyu Kang
Yeol-Kyeong Lee
Jin Hur, Fellow IEEE |
