Int'l Conf.

NEWS

Int'l Conf.

Home

번호	분류	제목	학회
135	2018	Comparative Analysis of Six-Step and Vector Controlled IPMSM under Inter-Turn Fault	ECCE 2018
134	2016	Characteristics of Irreversible Demagnetization in accordance with Phase Advance Angle in IPM-type BLDC Motor	CEFC 2016
133	2016	Characteristic Analysis of Irreversible Demagnetization in accordance with Variation of Freewheeling Current in IPM-type BLDC Motor"	MMM 2016
132	2019	Bearing Fault Detection Using Low-Frequency Total Components in Phase Current	ECCE 2019
131	2023	Application of New Shield Structure for Shaft Voltage Reduction in IPMSM	IEEE ECCE2023 (Nashville, USA)
130	2019	Analysis of the Torque Characteristics of Dual Airgap Spoke Type Permanent Magnet Vemier Machine considering Pole Ratio Effect	CONPUMAG 2019
129	2017	Analysis of Cogging Torque and Torque Ripple according to Unevenly Magnetized Permanent Magnet in PMSM	ECCE 2017
128	2018	Accelerated Life Test of Bearing under Electrical Stress	ECCE 2018
127	2018	A Novel Fault Detection and Identification Technique for IPMSM using Voltage Angle [2]	ECCE 2018
126	2018	A Novel Demagnetization Fault Detection Technique for IPMSM using Voltage Angle	INTERMAG2018
125	2023	A Fault Diagnosis Method in BLDC Motor Drive Systems Using Moving Average Filter for Back Electromotive Force Signal Processing	ICPE (ECCE-Asia) 2023
124	2013	"Zero torque pulsation of surface permanent magnet synchronous motor for ship gyro stabilizer by pole/slot number and air-gap designs"	Compumag 2013
123	2010	"Vibration Reduction of IPM Type BLDC Motor Using Negative Third Harmonic Elimination Method of Air-Gap Flux Density"	IEEE-ECCE 2010
122	2010	"Torque Characteristics Analysis of IPM Type BLDC Motor Considering Pole/Slot Combination under Stator-Turn Fault Condition"	IEEE CEFC 2010
121	2002	"Torque Characteristics Analysis Considering the Tolerance of Electric Machine by Stochastic Response Surface Method"	IEEE IAS 2002
120	2004	"Tolerance Allocation of Barrier Shape in Switched Reluctance Motors based on the Stochastic Response Surface Methodology,"	IEEE IAS 2004
119	2003	"Three Dimensional Characteristic Analysis of Micro BLDC Motor According to Slotless Winding Shape,"	IEEE INTERMAG 2003
118	2009	"The Shape Design of Interior Type Permanent Magnet BLDC Motor for Minimization of Mechanical Vibration"	IEEE ECCE 2009
117	2010	"The Novel Method for Vibration Reduction of IPM Type BLDC Motor"	IEEE CEFC 2010
116	2012	"Suppression of Shaft Voltage using by motor shape for prevention of bearing faults in IPM-type high-voltage motors"	CEFC 2012

나눔글꼴 설치 안내

이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

✔ 설치 취소

SketchBook5,스케치북5

나눔글꼴 설치 안내

이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

2sisstore