28 | 2007 |
"Fuel Cell Generation System With a New Active Clamping Current-Fed Half-Bridge Converter"
|
IEEE Transactions
on Energy Conversion | S.J. Jang, C.Y. Won,
B.K. Lee and Jin Hur |
27 | 2007 |
"A Novel Ultrasonic Motor Using Orthogonal Bimorphs"
|
IEEE Transactions
on Magnetics | J.M. Seo, Jin Hur
and H.G. Sung |
26 | 2006 |
"Implementation of Low Cost and Advanced Slotless Brushless DC Motor Drive Using PLL Algorithm"
|
Journal of Electric Power
Components and Systems | Y.H. Yoon, B.K. Lee,
Jin Hur, Y.C. Kim,
C.Y. Won and D.Y. Yoo |
25 | 2006 |
"Characteristic Analysis of the Slotless Axial-Flux Type Brushless DC Motors Using Image Method"
|
IEEE Transactions
on Magnetics | S.H. Lee, S.B. Park,
S.O. Kwon, J.Y. Lee,
J.J. Lee, J.P. Hong,
and Jin Hur |
24 | 2006 |
"Determination of Parameters Considering Magnetic Nonlinearity in an Interior Permanent Magnet Synchronous Motor"
|
IEEE Transactions
on Magnetics | J.Y. Lee, S.H. Lee,
G.H. Lee, J.P. Hong,
and Jin Hur |
23 | 2005 |
"Development of BLDC Motor using Metal Powdered Core for 42V Fan Application of Hybrid Electric Vehicle"
|
WSAES Transaction
on Circuit and Systems | Jin Hur, H.G. Sung
and J.P. Hong |
22 | 2004 |
"Analysis of Single-Phase Line-Start Permanent Magnet Motor Considering Iron Loss and Parameter Variation with Load Angle"
|
IEEE Transactions on
Industrial Applications | G.H. Kang, B.K. Lee,
H. Nam, Jin Hur
and J.P. Hong |
21 | 2004 |
"Prediction of Torque Characteristic on Barrier Type SRM Using Stochastic Response Surface Methodology Combined with Moving Least Square"
|
IEEE Transactions
on Magnetics | Y.G. Kim, G.H. Lee,
J.P. Hong, Jin Hur,
B.K. Lee and G.H. Kang |
20 | 2004 |
"High-Speed Position Control of Linear DC Motor for Carrier with Fast Response Using Seek Algorithm and Neural Network"
|
Journal of Electric Power
Components and Systems | H.G. Sung, J.H. Borm,
Jin Hur and I.S. Jung |
19 | 2004 |
"CHARACTERISTIC COMPARISONS BETWEEN IRON POWDER MATERIALS AND LAMINATION CORES IN BRUSHLESS MOTORS"
|
Computer Engineering
in Applied Electromagnetism | Y.G. Kim, J.P. Hong,
G.H. Ha, Jin Hur
and H.G. Sung |
18 | 2004 |
"OPTIMIZATION OF BARRIER TYPE SRMs with RESPONSE SURFACE METHODOLOGY COMBINED WITH MOVING LEAST SQUARE METHOD"
|
Computer Engineering
in Applied Electromagnetism | Y.G. Kim, J.Y. Lee,
J.P. Hong and Jin Hur |
17 | 2003 |
"Three-Dimensional Characteristic Analysis of Micro BLDC Motor According to Slotless Winding Shape"
|
IEEE Transactions
on Magnetics | Jin Hur, S.H. Ryu,
I.S. Jung, H.G. Sung
and B.I. Kwon |
16 | 2003 |
"Torque Characteristic Analysis Considering the Manufacturing Tolerance for Electric Machine by Stochastic Response Surface Method"
|
IEEE Transactions on
Industrial Applications | Y.K. Kim, J.P. Hong
and Jin Hur |
15 | 2003 |
"Analysis of Irreversible Magnet Demagnetization in Line-Start Motors based on Finite Element Method"
|
IEEE Transactions
on Magnetic | G.H. Kang, Jin Hur,
J.P. Hong, and D.H. Kang |
14 | 2003 |
"Performance analysis of a brushless dc motor due to magnetization distribution in a continuous ring magnet,"
|
Journal of Applied Physics | Jin Hur, I.S. Jung,
H.G. Sung and S.S. Park |
13 | 2003 |
"Modeling of switched reluctance motor using Fourier series for performance analysis"
|
Journal of Applied Physics | Jin Hur, C.C. Kim
and D.S. Hyun |
12 | 2002 |
"Three Dimensional Eddy Current Calculation Using Magnetic Scalar Potential in Conducting Regions"
|
Journal of Applied Physics | Jin Hur, D.S. Hyun,
S.S. Kim, G.H. Kang
and J.P. Hong |
11 | 2001 |
"3D Time-Stepping Analysis of Induction Motor by New Equivalent Magnetic Circuit Network Method"
|
IEEE Transactions
on Magnetics | Jin Hur, Hamid A. Toliyat
and Jung-Pyo Hong |
10 | 2001 |
"Performance Analysis of Skewed PM Linear Synchronous Motor According to Various Design Parameters"
|
IEEE Transactions
on Magnetics | I.S. Jung, Jin Hur
and D.S. Hyun |
9 | 2001 |
"Dynamic Analysis of Linear Induction Motors using 3-D Equivalent Magnetic Circuit Network (EMCN) Method"
|
Journal of Electric Power
Components and Systems | Jin Hur, Hamid A. Toliyat
and J.P. Hong |