48 | 2014 |
"Finite-Element Analysis of the Demagnetization of IPM-type BLDC Motor with Stator Turn Fault"
|
IEEE Transactions
on Magnetics | Y. S. Lee, K. T. Kim,
Jin Hur |
47 | 2014 |
"Diagnosis Technique Using a Detection Coil in BLDC Motors with Inter-Turn Faults"
|
IEEE Transactions
on Magnetics | K. T. Kim, S. T. Lee,
Jin hur |
46 | 2014 |
"Comparison of the Fault Characteristics of IPM-type and SPM-type BLDC Motors under Inter-Turn Fault Conditions Using Winding Function Theory"
|
IEEE Transactions on
Industrial Applications | K. T. Kim, J. K. Park,
Jin Hur |
45 | 2013 |
“Design and Analysis of a Spoke Type Motor with Segmented Pushing Permanent-Magnet for concentrating air-gap flux density”
|
IEEE Magnetics | M.Mizanoor,
K.T. Kim, Jin Hur |
44 | 2013 |
“Optimization Methods of Torque Density for Developing the Neodymium Free SPOKE-type BLDC Motor”
|
IEEE Magnetics | H.W. Kim, K.T. Kim,
Y.S. Jo, Jin hur |
43 | 2013 |
“Suppression of Shaft Voltage by Rotor and Magnet Shape Design of IPM-Type High Voltage Motor”
|
Journal
of Electrical Engineering
& Technology (JEET) | K.T. Kim, S.H. Cha,
J. Hur, B.W. Kim |
42 | 2013 |
“Calculation of Distributed Magnetic Flux Density under Stator-Turn Fault Condition”
|
Journal
of Power Electronics
(JPE) | K.T. Kim, B.W. Kim,
Jin Hur |
» | 2012 |
“Stator and Rotor Shape Designs of Interior Permanent Magnet Type Brushless DC Motor for Reducing Torque Fluctuation"
|
IEEE Transactions
on Magnetics | S.K. Lee, G.H. Kang
and Jin Hur |
40 | 2012 |
“Finite Element Computation of Magnetic Vibration Sources in 100kW Two Fractional-Slot Interior Permanent Magnet Machines for Ship"
|
IEEE Transactions
on Magnetics | S.K. Lee, G.H. Kang
and Jin Hur |
39 | 2012 |
“ANALYSIS AND DESIGN OF SLOTTED TUBULAR LINEAR ACTUATOR FOR THE ECO-PEDAL SYSTEM OF A VEHICLE"
|
IEEE Transactions
on Magnetics | Y.K. Kim, B.G. Gu,
I.S. Jung, S.H. Won
and Jin Hur |
38 | 2012 |
“Simplified Impedance Modeling and Analysis for Inter-Turn Fault of IPM-type BLDC motor"
|
Journal of Power
Electronics | B.W. Kim, K.T. Kim
and Jin Hur |
37 | 2011 |
"Vibration Reduction of IPM-Type BLDC Motor Using Negative Third Harmonic Elimination Method of Air-Gap Flux Density"
|
IEEE Transactions on
Industrial Applications | Jin Hur, J.W. Reu,
B.W. Kim
and G.H. Kang |
36 | 2011 |
"Modeling of Core loss Resistance for d-q Equivalent Circuit Analysis of IPMSM considering Harmonic Linkage Flux"
|
IEEE Transactions
on Magnetics | B.H. Lee, S.O. Kwon,
G.H. Lee, Jin Hur
and J.P. Hong |
35 | 2010 |
"Rotor Shape Design of an Interior PM Type BLDC Motor for Improving Mechanical Vibration and EMI Characteristics"
|
Journal
of Electrical Engineering
& Technology (JEET) | Jin Hur
and B. W. Kim |
34 | 2010 |
"Development of an Electric Motor-Driven Pump Unit for Electro-Hydraulic Power Steering with 42V Power-Net"
|
International Journal
of Automotive Technology | Jin Hur |
33 | 2009 |
"A Novel Cogging Torque Reduction Method for Interior Type Permanent Magnet Motor"
|
IEEE Transactions on
Industrial Applications | G.H. Kang, Y.D. Son ,
G.T. Kim, and Jin Hur |
32 | 2008 |
"A Cost Effective 3-Phase FRM Drive with 4 switches and Bootstrap Gate Control Circuitry"
|
IET Electronics Letters | H.S. Kang, Jin Hur,
and B.K. Lee |
31 | 2008 |
"Characteristic Analysis of Interior Permanent Magnet Synchronous Motor in Electro-Hydraulic Power Steering System"
|
IEEE Transactions
on Industrial Electronics | Jin Hur |
30 | 2007 |
"A Fuzzy Logic based Vector Control Scheme for Permanent Magnet Synchronous Motors in Elevator Drive Applications"
|
IEEE Transactions
on Industrial Electronics | J.S. Yu, S.H. Kim,
B.K. Lee, C.Y. Won
and Jin Hur |
29 | 2007 |
"Design of fuel cell generation system using a PEMFC simulator"
|
Journal of Electric Power
Systems Research | T.W. Lee, Jin Hur,
B.K. Lee, and C.Y. Won |